1
0
mirror of https://github.com/openbsd/src.git synced 2024-12-21 23:18:00 -08:00

Fix some spelling.

Input and ok jmc@, jsg@
This commit is contained in:
mglocker 2024-09-04 07:54:51 +00:00
parent 499f8bda83
commit 9593dc34da
85 changed files with 190 additions and 188 deletions

View File

@ -1,4 +1,4 @@
/* $OpenBSD: trap.c,v 1.105 2024/02/21 15:53:07 deraadt Exp $ */
/* $OpenBSD: trap.c,v 1.106 2024/09/04 07:54:51 mglocker Exp $ */
/* $NetBSD: trap.c,v 1.2 2003/05/04 23:51:56 fvdl Exp $ */
/*-
@ -182,7 +182,7 @@ upageflttrap(struct trapframe *frame, uint64_t cr2)
int signal, sicode, error;
/*
* If NX is not enabled, we cant distinguish between PROT_READ
* If NX is not enabled, we can't distinguish between PROT_READ
* and PROT_EXEC access, so try both.
*/
error = uvm_fault(&p->p_vmspace->vm_map, va, 0, access_type);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: vmm_machdep.c,v 1.34 2024/09/03 13:36:19 dv Exp $ */
/* $OpenBSD: vmm_machdep.c,v 1.35 2024/09/04 07:54:51 mglocker Exp $ */
/*
* Copyright (c) 2014 Mike Larkin <mlarkin@openbsd.org>
*
@ -4181,7 +4181,8 @@ vcpu_run_vmx(struct vcpu *vcpu, struct vm_run_params *vrp)
break;
}
if (!(exitinfo & VMX_EXIT_INFO_HAVE_REASON)) {
printf("%s: cant read exit reason\n", __func__);
printf("%s: can't read exit reason\n",
__func__);
ret = EINVAL;
break;
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: mplock.h,v 1.6 2024/07/03 01:36:50 jsg Exp $ */
/* $OpenBSD: mplock.h,v 1.7 2024/09/04 07:54:51 mglocker Exp $ */
/*
* Copyright (c) 2004 Niklas Hallqvist. All rights reserved.
@ -29,7 +29,7 @@
/*
* Really simple spinlock implementation with recursive capabilities.
* Correctness is paramount, no fancyness allowed.
* Correctness is paramount, no fanciness allowed.
*/
#define MPL_LOCKED 0

View File

@ -1,4 +1,4 @@
/* $OpenBSD: md.h,v 1.7 2003/04/10 17:27:58 mickey Exp $ */
/* $OpenBSD: md.h,v 1.8 2024/09/04 07:54:51 mglocker Exp $ */
/*
(c) Copyright 1986 HEWLETT-PACKARD COMPANY
To anyone who acknowledges that this file is provided "AS IS"
@ -17,7 +17,7 @@
#include <sys/cdefs.h>
/*****************************************************************
* Muliply/Divide SFU Internal State *
* Multiply/Divide SFU Internal State *
*****************************************************************/
struct mdsfu_register {
int rslt_hi,

View File

@ -1,4 +1,4 @@
/* $OpenBSD: trap.c,v 1.164 2023/12/13 15:57:22 miod Exp $ */
/* $OpenBSD: trap.c,v 1.165 2024/09/04 07:54:51 mglocker Exp $ */
/* $NetBSD: trap.c,v 1.95 1996/05/05 06:50:02 mycroft Exp $ */
/*-
@ -121,7 +121,7 @@ upageflttrap(struct trapframe *frame, uint32_t cr2)
/*
* cpu_pae is true if system has PAE + NX.
* If NX is not enabled, we cant distinguish between PROT_READ
* If NX is not enabled, we can't distinguish between PROT_READ
* and PROT_EXEC access, so try both.
*/
error = uvm_fault(&p->p_vmspace->vm_map, va, 0, access_type);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: disksubr.c,v 1.62 2022/10/14 13:22:57 krw Exp $ */
/* $OpenBSD: disksubr.c,v 1.63 2024/09/04 07:54:51 mglocker Exp $ */
/* $NetBSD: disksubr.c,v 1.12 2002/02/19 17:09:44 wiz Exp $ */
/*
@ -76,8 +76,8 @@
* Mach writedisklabel logic seems to fail when no BSD label is found.
*
* Kernel handles disklabel in this way;
* - searchs BSD label at offset 64
* - if not found, searchs UniOS/ISI label at the end of block
* - searches BSD label at offset 64
* - if not found, searches UniOS/ISI label at the end of block
* - kernel can distinguish whether it was SunOS label or UniOS/ISI
* label and understand both
* - kernel writes UniOS/ISI label combined with BSD label to update

View File

@ -1,4 +1,4 @@
/* $OpenBSD: zs.c,v 1.33 2023/01/04 09:34:26 jsg Exp $ */
/* $OpenBSD: zs.c,v 1.34 2024/09/04 07:54:51 mglocker Exp $ */
/* $NetBSD: zs.c,v 1.17 2001/06/19 13:42:15 wiz Exp $ */
/*
@ -691,7 +691,7 @@ zs_set_modes(struct zs_chanstate *cs, int cflag)
/*
* Make sure we don't enable hfc on a signal line we're ignoring.
* As we enable CTS interrupts only if we have CRTSCTS or CDTRCTS,
* this code also effectivly turns off ZSWR15_CTS_IE.
* this code also effectively turns off ZSWR15_CTS_IE.
*
* Also, disable DCD interrupts if we've been told to ignore
* the DCD pin. Happens on mac68k because the input line for
@ -880,7 +880,7 @@ static int stdin, stdout;
* (the video, better than CN_LOWPRI), and CN_HIGHPRI (pick me!)
*
* As the mac's a bit different, we do extra work here. We mainly check
* to see if we have serial echo going on. Also chould check for default
* to see if we have serial echo going on. Also could check for default
* speeds.
*/

View File

@ -1,4 +1,4 @@
/* $OpenBSD: mplock.h,v 1.6 2024/04/03 19:30:59 gkoehler Exp $ */
/* $OpenBSD: mplock.h,v 1.7 2024/09/04 07:54:51 mglocker Exp $ */
/*
* Copyright (c) 2004 Niklas Hallqvist. All rights reserved.
@ -32,7 +32,7 @@
/*
* __ppc_lock exists because pte_spill_r() can't use __mp_lock.
* Really simple spinlock implementation with recursive capabilities.
* Correctness is paramount, no fancyness allowed.
* Correctness is paramount, no fanciness allowed.
*/
struct __ppc_lock {

View File

@ -1,4 +1,4 @@
/* $OpenBSD: plic.c,v 1.12 2024/01/26 19:20:00 kettenis Exp $ */
/* $OpenBSD: plic.c,v 1.13 2024/09/04 07:54:51 mglocker Exp $ */
/*
* Copyright (c) 2020, Mars Li <mengshi.li.mars@gmail.com>
@ -292,7 +292,7 @@ plic_attach(struct device *parent, struct device *dev, void *aux)
plic_irq_handler, NULL, "plic0");
/*
* From now on, spl update must be enforeced to plic, so
* From now on, spl update must be enforced to plic, so
* spl* routine should be updated.
*/
riscv_set_intr_func(plic_splraise, plic_spllower,

View File

@ -1,4 +1,4 @@
/* $OpenBSD: pmap.c,v 1.41 2024/04/29 10:07:37 jsg Exp $ */
/* $OpenBSD: pmap.c,v 1.42 2024/09/04 07:54:51 mglocker Exp $ */
/*
* Copyright (c) 2019-2020 Brian Bamsch <bbamsch@google.com>
@ -276,7 +276,7 @@ VP_IDX3(vaddr_t va)
* On RISC-V, the encodings for write permission without read
* permission (r=0, w=1, x=0, or r=0, w=1, x=1) are reserved, so
* PROT_WRITE implies PROT_READ. We need to handle PROT_NONE
* seperately (see pmap_pte_update()) since r=0, w=0, x=0 is reserved
* separately (see pmap_pte_update()) since r=0, w=0, x=0 is reserved
* for non-leaf page table entries.
*/
const pt_entry_t ap_bits_user[8] = {

View File

@ -1,4 +1,4 @@
/* $OpenBSD: interrupt.c,v 1.19 2024/06/26 01:40:49 jsg Exp $ */
/* $OpenBSD: interrupt.c,v 1.20 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: interrupt.c,v 1.18 2006/01/25 00:02:57 uwe Exp $ */
/*-
@ -366,7 +366,7 @@ intc_intr_priority(int evtcode, int level)
}
/*
* Interrupt handler holder allocater.
* Interrupt handler holder allocator.
*/
struct intc_intrhand *
intc_alloc_ih(void)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: vectors.S,v 1.9 2022/12/08 02:11:27 guenther Exp $ */
/* $OpenBSD: vectors.S,v 1.10 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: exception_vector.S,v 1.19 2006/08/22 21:47:57 uwe Exp $ */
/*-
@ -47,7 +47,7 @@
/*
* Exception vectors.
* The following routines are copied to vector addreses.
* The following routines are copied to vector addresses.
* sh_vector_generic: VBR + 0x100
* sh_vector_tlbmiss: VBR + 0x400
* sh_vector_interrupt: VBR + 0x600

View File

@ -1,4 +1,4 @@
/* $OpenBSD: fb.c,v 1.30 2020/05/25 09:55:48 jsg Exp $ */
/* $OpenBSD: fb.c,v 1.31 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: fb.c,v 1.23 1997/07/07 23:30:22 pk Exp $ */
/*
@ -211,7 +211,7 @@ fbwscons_init(struct sunfb *sf, int flags, int isconsole)
* switch from the 12x22 font to the more adequate 8x16 font
* here.
* If we are the console device, we need to adjust two things:
* - the display row should be overrided from the current PROM
* - the display row should be overridden from the current PROM
* metrics, since it will not match the PROM reality anymore.
* - the screen needs to be cleared.
*

View File

@ -1,4 +1,4 @@
/* $OpenBSD: zs.c,v 1.34 2024/03/29 21:17:13 miod Exp $ */
/* $OpenBSD: zs.c,v 1.35 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: zs.c,v 1.29 2001/05/30 15:24:24 lukem Exp $ */
/*-
@ -344,7 +344,7 @@ zs_attach(struct zsc_softc *zsc, struct zsdevice *zsd, int pri)
if ((zsc_args.hwflags & ZS_HWFLAG_CONSOLE_OUTPUT) != 0) {
zs_conschan_put = zc;
}
/* Childs need to set cn_dev, etc */
/* Children need to set cn_dev, etc */
cs->cs_reg_csr = &zc->zc_csr;
cs->cs_reg_data = &zc->zc_data;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: locore.s,v 1.223 2024/04/14 19:08:09 miod Exp $ */
/* $OpenBSD: locore.s,v 1.224 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: locore.s,v 1.137 2001/08/13 06:10:10 jdolecek Exp $ */
/*
@ -639,7 +639,7 @@ trapbase:
UTRAP 0x004 ! 004 = SIR -- ROM should get this
UTRAP 0x005 ! 005 = RED state exception
UTRAP 0x006; UTRAP 0x007
VTRAP T_INST_EXCEPT, textfault ! 008 = instr. access exept
VTRAP T_INST_EXCEPT, textfault ! 008 = instr. access except
VTRAP T_TEXTFAULT, textfault ! 009 = instr. access MMU miss
VTRAP T_INST_ERROR, textfault ! 00a = instr. access err
UTRAP 0x00b; UTRAP 0x00c; UTRAP 0x00d; UTRAP 0x00e; UTRAP 0x00f
@ -799,7 +799,7 @@ trapbase_priv:
UTRAP 0x005 ! 005 = RED state exception
UTRAP 0x006; UTRAP 0x007
ktextfault:
VTRAP T_INST_EXCEPT, textfault ! 008 = instr. access exept
VTRAP T_INST_EXCEPT, textfault ! 008 = instr. access except
VTRAP T_TEXTFAULT, textfault ! 009 = instr. access MMU miss -- no MMU
VTRAP T_INST_ERROR, textfault ! 00a = instr. access err
UTRAP 0x00b; UTRAP 0x00c; UTRAP 0x00d; UTRAP 0x00e; UTRAP 0x00f

View File

@ -1,4 +1,4 @@
\ $OpenBSD: bootblk.fth,v 1.10 2020/06/05 09:16:13 otto Exp $
\ $OpenBSD: bootblk.fth,v 1.11 2024/09/04 07:54:52 mglocker Exp $
\ $NetBSD: bootblk.fth,v 1.15 2015/08/20 05:40:08 dholland Exp $
\
\ IEEE 1275 Open Firmware Boot Block
@ -308,7 +308,7 @@ defer if_daddr
niaddr /w* constant narraysize
\ Assume UFS2 dinodes are always biger than UFS1
\ Assume UFS2 dinodes are always bigger than UFS1
ufs2_dinode_SIZEOF buffer: cur-inode
0 value indir-block
create indir-addr -1 , -1 ,
@ -431,7 +431,7 @@ create cur-blockno -1 l, -1 l, \ Current disk block.
: is-symlink? ( ufs1_dinode -- is-symlink? ) di-mode w@ ifmt and iflnk = ;
\
\ Multi-FS initialiation.
\ Multi-FS initialization.
\
\ It's way down here so all the fs-specific routines have already been defined.
\

View File

@ -1,4 +1,4 @@
/* $OpenBSD: siphash.h,v 1.5 2015/02/20 11:51:03 tedu Exp $ */
/* $OpenBSD: siphash.h,v 1.6 2024/09/04 07:54:52 mglocker Exp $ */
/*-
* Copyright (c) 2013 Andre Oppermann <andre@FreeBSD.org>
* All rights reserved.
@ -35,7 +35,7 @@
* optimized for speed on short messages returning a 64bit hash/digest value.
*
* The number of rounds is defined during the initialization:
* SipHash24_Init() for the fast and resonable strong version
* SipHash24_Init() for the fast and reasonably strong version
* SipHash48_Init() for the strong version (half as fast)
*
* struct SIPHASH_CTX ctx;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: db_elf.c,v 1.32 2021/03/12 10:22:46 jsg Exp $ */
/* $OpenBSD: db_elf.c,v 1.33 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: db_elf.c,v 1.13 2000/07/07 21:55:18 jhawk Exp $ */
/*-
@ -280,7 +280,7 @@ db_elf_sym_search(vaddr_t off, db_strategy_t strategy, db_expr_t *diffp)
if (symp->st_name == 0)
continue;
#if 0
/* This prevents me from seeing anythin in locore.s -- eeh */
/* This prevents me from seeing anything in locore.s -- eeh */
if (ELF_SYM_TYPE(symp->st_info) != Elf_estt_object &&
ELF_SYM_TYPE(symp->st_info) != Elf_estt_func)
continue;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: atk0110.c,v 1.19 2022/04/06 18:59:27 naddy Exp $ */
/* $OpenBSD: atk0110.c,v 1.20 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2009 Constantine A. Murenin <cnst+openbsd@bugmail.mojo.ru>
@ -215,7 +215,7 @@ aibs_attach_sif(struct aibs_softc *sc, enum sensor_type st)
aml_freevalue(&res);
return;
} else if (res.length - 1 > n) {
printf("%s: %s: misformed package: %i/%i",
printf("%s: %s: malformed package: %i/%i",
DEVNAME(sc), name, n, res.length - 1);
#ifdef AIBS_MORE_SENSORS
n = res.length - 1;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: atascsi.c,v 1.155 2024/05/26 10:01:01 jsg Exp $ */
/* $OpenBSD: atascsi.c,v 1.156 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2007 David Gwynne <dlg@openbsd.org>
@ -418,7 +418,7 @@ atascsi_probe(struct scsi_link *link)
xa->pmp_port = ap->ap_pmp_port;
xa->atascsi_private = &ahp->ahp_iopool;
ata_exec(as, xa);
ata_polled(xa); /* we dont care if it doesnt work */
ata_polled(xa); /* we don't care if it doesn't work */
return (0);
error:
@ -1797,7 +1797,7 @@ ata_polled(struct ata_xfer *xa)
int rv;
if (!ISSET(xa->flags, ATA_F_DONE))
panic("ata_polled: xa isnt complete");
panic("ata_polled: xa isn't complete");
switch (xa->state) {
case ATA_S_COMPLETE:

View File

@ -1,4 +1,4 @@
/* $OpenBSD: com_cardbus.c,v 1.45 2024/05/24 06:26:47 jsg Exp $ */
/* $OpenBSD: com_cardbus.c,v 1.46 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: com_cardbus.c,v 1.4 2000/04/17 09:21:59 joda Exp $ */
/*
@ -36,7 +36,7 @@
/* This is a driver for CardBus based serial devices. It is less
generic than it could be, but it keeps the complexity down. So far
it assumes that anything that reports itself as a `serial' device
is infact a 16x50 or 8250, which is not necessarily true (in
is in fact a 16x50 or 8250, which is not necessarily true (in
practice this shouldn't be a problem). It also does not handle
devices in the `multiport serial' or `modem' sub-classes, I've
never seen any of these, so I don't know what they might look like.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: i2c_scan.c,v 1.146 2019/12/16 19:17:04 claudio Exp $ */
/* $OpenBSD: i2c_scan.c,v 1.147 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2005 Theo de Raadt <deraadt@openbsd.org>
@ -657,7 +657,7 @@ iic_probe_sensor(struct device *self, u_int8_t addr)
(iicprobe(0x03) & 0x3f) == 0x00 && iicprobe(0x04) <= 0x08)
/*
* Genesys Logic doesn't make the datasheet
* for the GL523SM publically available, so
* for the GL523SM publicly available, so
* the checks above are nothing more than a
* (conservative) educated guess.
*/

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ahci.c,v 1.41 2024/05/28 01:37:53 jsg Exp $ */
/* $OpenBSD: ahci.c,v 1.42 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2006 David Gwynne <dlg@openbsd.org>
@ -268,7 +268,7 @@ noccc:
sc->sc_ncmds = max(2, sc->sc_ncmds);
for (i = 0; i < AHCI_MAX_PORTS; i++) {
if (!ISSET(pi, 1U << i)) {
/* dont allocate stuff if the port isnt implemented */
/* don't allocate stuff if the port isn't implemented */
continue;
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: aic6360.c,v 1.40 2022/04/16 19:19:58 naddy Exp $ */
/* $OpenBSD: aic6360.c,v 1.41 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: aic6360.c,v 1.52 1996/12/10 21:27:51 thorpej Exp $ */
#ifdef DDB
@ -69,7 +69,7 @@
*/
/* Use doubleword transfers to/from SCSI chip. Note: This requires
* motherboard support. Basicly, some motherboard chipsets are able to
* motherboard support. Basically, some motherboard chipsets are able to
* split a 32 bit I/O operation into two 16 bit I/O operations,
* transparently to the processor. This speeds up some things, notably long
* data transfers.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: aic6360var.h,v 1.10 2020/07/22 13:16:04 krw Exp $ */
/* $OpenBSD: aic6360var.h,v 1.11 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: aic6360.c,v 1.52 1996/12/10 21:27:51 thorpej Exp $ */
/*
@ -68,7 +68,7 @@ struct aic_dma_seg {
/*
* ACB. Holds additional information for each SCSI command Comments: We
* need a separate scsi command block because we may need to overwrite it
* with a request sense command. Basicly, we refrain from fiddling with
* with a request sense command. Basically, we refrain from fiddling with
* the scsi_xfer struct (except do the expected updating of return values).
* We'll generally update: xs->{flags,resid,error,sense,status} and
* occasionally xs->retries.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: aic79xx.c,v 1.68 2024/09/01 03:08:56 jsg Exp $ */
/* $OpenBSD: aic79xx.c,v 1.69 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2004 Milos Urbanek, Kenneth R. Westerback & Marco Peereboom
@ -1624,7 +1624,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
* 'Selection in Progress' status bit, the busy
* LED does. SELINGO is only cleared by a successful
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* the LED turns off just in case no future successful
* selections occur (e.g. no devices on the bus).
*/
ahd_outb(ahd, CLRSINT0, CLRSELINGO);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: aic79xx.h,v 1.32 2024/09/01 03:08:56 jsg Exp $ */
/* $OpenBSD: aic79xx.h,v 1.33 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2004 Milos Urbanek, Kenneth R. Westerback & Marco Peereboom
@ -831,8 +831,8 @@ struct seeprom_config {
* BIOS Control Bits
*/
uint16_t bios_control; /* word 16 */
#define CFSUPREM 0x0001 /* support all removeable drives */
#define CFSUPREMB 0x0002 /* support removeable boot drives */
#define CFSUPREM 0x0001 /* support all removable drives */
#define CFSUPREMB 0x0002 /* support removable boot drives */
#define CFBIOSSTATE 0x000C /* BIOS Action State */
#define CFBS_DISABLED 0x00
#define CFBS_ENABLED 0x04

View File

@ -1,4 +1,4 @@
/* $OpenBSD: aic7xxx.c,v 1.97 2022/01/09 05:42:38 jsg Exp $ */
/* $OpenBSD: aic7xxx.c,v 1.98 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: aic7xxx.c,v 1.108 2003/11/02 11:07:44 wiz Exp $ */
/*
@ -40,7 +40,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: aic7xxx.c,v 1.97 2022/01/09 05:42:38 jsg Exp $
* $Id: aic7xxx.c,v 1.98 2024/09/04 07:54:52 mglocker Exp $
*/
/*
* Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003
@ -1199,7 +1199,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
* 'Selection in Progress' status bit, the busy
* LED does. SELINGO is only cleared by a successful
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* the LED turns off just in case no future successful
* selections occur (e.g. no devices on the bus).
*/
ahc_outb(ahc, CLRSINT0, CLRSELINGO);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: atwvar.h,v 1.26 2013/12/06 21:03:02 deraadt Exp $ */
/* $OpenBSD: atwvar.h,v 1.27 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: atwvar.h,v 1.13 2004/07/23 07:07:55 dyoung Exp $ */
/*
@ -37,7 +37,7 @@
#include <sys/timeout.h>
/*
* Some misc. statics, useful for debugging.
* Some misc. statistics, useful for debugging.
*/
struct atw_stats {
u_long ts_tx_tuf; /* transmit underflow errors */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: fxpreg.h,v 1.14 2012/04/03 23:39:09 deraadt Exp $ */
/* $OpenBSD: fxpreg.h,v 1.15 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 1995, David Greenman
@ -121,7 +121,7 @@ struct fxp_cb_ias {
* Bitfields cleaned out since it is not endian compatible. OK
* you can define a big endian structure but can never be 100% safe...
*
* ANY PROGRAMER TRYING THE STUNT WITH BITFIELDS IN A DEVICE DRIVER
* ANY PROGRAMMER TRYING THE STUNT WITH BITFIELDS IN A DEVICE DRIVER
* SHOULD BE PUT UP AGAINST THE WALL, BLINDFOLDED AND SHOT!
*/
struct fxp_cb_config {

View File

@ -1,4 +1,4 @@
/* $OpenBSD: gemvar.h,v 1.32 2024/05/13 01:15:50 jsg Exp $ */
/* $OpenBSD: gemvar.h,v 1.33 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: gemvar.h,v 1.1 2001/09/16 00:11:43 eeh Exp $ */
/*
@ -106,7 +106,7 @@ struct gem_txthresh_tab {
};
/*
* Some misc. statics, useful for debugging.
* Some misc. statistics, useful for debugging.
*/
struct gem_stats {
u_long ts_tx_uf; /* transmit underflow errors */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ncr53c9xvar.h,v 1.25 2024/04/03 18:41:38 miod Exp $ */
/* $OpenBSD: ncr53c9xvar.h,v 1.26 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: ncr53c9xvar.h,v 1.13 1998/05/26 23:17:34 thorpej Exp $ */
/*-
@ -88,7 +88,7 @@
/*
* ECB. Holds additional information for each SCSI command Comments: We
* need a separate scsi command block because we may need to overwrite it
* with a request sense command. Basicly, we refrain from fiddling with
* with a request sense command. Basically, we refrain from fiddling with
* the scsi_xfer struct (except do the expected updating of return values).
* We'll generally update: xs->{flags,resid,error,sense,status} and
* occasionally xs->retries.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: osiopvar.h,v 1.12 2020/07/22 13:16:04 krw Exp $ */
/* $OpenBSD: osiopvar.h,v 1.13 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: osiopvar.h,v 1.3 2002/05/14 02:58:35 matt Exp $ */
/*
@ -133,7 +133,7 @@ struct osiop_ds {
/*
* ACB. Holds additional information for each SCSI command Comments:
* Basicly, we refrain from fiddling with the scsi_xfer struct
* Basically, we refrain from fiddling with the scsi_xfer struct
* (except do the expected updating of return values).
* We'll generally update: xs->{flags,resid,error,status} and
* occasionally xs->retries.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: sili.c,v 1.61 2022/04/09 20:10:26 naddy Exp $ */
/* $OpenBSD: sili.c,v 1.62 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2007 David Gwynne <dlg@openbsd.org>
@ -123,7 +123,7 @@ void sili_ports_free(struct sili_softc *);
/*
* you can fit 22 sge's into 7 sgts and a prb:
* there's 1 sgl in an atapi prb (two in the ata one, but we cant over
* there's 1 sgl in an atapi prb (two in the ata one, but we can't over
* advertise), but that's needed for the chain element. you get three sges
* per sgt cos you lose the 4th sge for the chaining, but you keep it in
* the last sgt. so 3 x 6 + 4 is 22.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: trm.c,v 1.46 2024/06/22 10:22:29 jsg Exp $
/* $OpenBSD: trm.c,v 1.47 2024/09/04 07:54:52 mglocker Exp $
* ------------------------------------------------------------
* O.S : OpenBSD
* File Name : trm.c
@ -1124,7 +1124,7 @@ trm_DataInPhase0(struct trm_softc *sc, struct trm_scsi_req_q *pSRB, u_int8_t *ps
*
* parsing the case:
* when a transfer not yet complete
* but be disconnected by uper layer
* but be disconnected by upper layer
* if transfer not yet complete
* there were some data residue in SCSI FIFO or
* SCSI transfer counter not empty

View File

@ -1,4 +1,4 @@
/* $OpenBSD: trm.h,v 1.7 2020/07/22 13:16:04 krw Exp $
/* $OpenBSD: trm.h,v 1.8 2024/09/04 07:54:52 mglocker Exp $
* ------------------------------------------------------------
* O.S : OpenBSD
* File Name : trm.h
@ -123,7 +123,7 @@ struct trm_scsi_req_q
#define TRM_NO_TAG 0x00
u_int8_t TargetStatus; /* SCSI status codes + Tekram: */
#define TRM_SCSI_UNEXP_BUS_FREE 0xFD /* Unexpect Bus Free */
#define TRM_SCSI_UNEXP_BUS_FREE 0xFD /* Unexpected Bus Free */
#define TRM_SCSI_BUS_RST_DETECTED 0xFE /* Scsi Bus Reset detected */
#define TRM_SCSI_SELECT_TIMEOUT 0xFF /* Selection Time out */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: kstat.c,v 1.3 2024/07/08 14:46:47 mpi Exp $ */
/* $OpenBSD: kstat.c,v 1.4 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2020 David Gwynne <dlg@openbsd.org>
@ -252,7 +252,7 @@ kstatioc_leave(struct kstat_req *ksreq, struct kstat *ks)
/* KSTAT_F_REALLOC */
KASSERTMSG(ks->ks_datalen == klen,
"kstat doesnt support resized data yet");
"kstat doesn't support resized data yet");
error = (*ks->ks_copy)(ks, buf);
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: arc.c,v 1.126 2024/05/24 06:02:53 jsg Exp $ */
/* $OpenBSD: arc.c,v 1.127 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2006 David Gwynne <dlg@openbsd.org>
@ -2219,7 +2219,7 @@ arc_bio_disk(struct arc_softc *sc, struct bioc_disk *bd)
bd->bd_lun = diskinfo->scsi_attr.lun;
#endif
/*
* the firmware doesnt seem to fill scsi_attr in, so fake it with
* the firmware doesn't seem to fill scsi_attr in, so fake it with
* the diskid.
*/
bd->bd_channel = 0;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: auich.c,v 1.119 2022/10/26 20:19:08 kn Exp $ */
/* $OpenBSD: auich.c,v 1.120 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2000,2001 Michael Shalayeff
@ -1422,7 +1422,7 @@ auich_calibrate(struct auich_softc *sc)
break;
/*
* check for strange changes in STS -
* XXX remove it when everythings fine
* XXX remove it when everything is fine
*/
if (sts != osts) {
printf("%s: ac97 sts changed after %d us sts=%b civ=%u\n",

View File

@ -1,4 +1,4 @@
/* $OpenBSD: bktr_audio.c,v 1.14 2022/01/09 05:42:58 jsg Exp $ */
/* $OpenBSD: bktr_audio.c,v 1.15 2024/09/04 07:54:52 mglocker Exp $ */
/* $FreeBSD: src/sys/dev/bktr/bktr_audio.c,v 1.8 2000/10/31 13:09:56 roger Exp $ */
/*
* This is part of the Driver for Video Capture Cards (Frame grabbers)
@ -267,7 +267,7 @@ init_BTSC( bktr_ptr_t bktr )
/*
* setup the dbx chip
* XXX FIXME: alot of work to be done here, this merely unmutes it.
* XXX FIXME: a lot of work to be done here, this merely unmutes it.
*/
int
set_BTSC( bktr_ptr_t bktr, int control )

View File

@ -1,4 +1,4 @@
/* $OpenBSD: i82365_pci.c,v 1.16 2024/05/24 06:02:53 jsg Exp $ */
/* $OpenBSD: i82365_pci.c,v 1.17 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: i82365_pci.c,v 1.11 2000/02/24 03:42:44 itohy Exp $ */
/*
@ -170,7 +170,8 @@ pcic_pci_attach(struct device *parent, struct device *self, void *aux)
if (irq) {
sc->ih = pcic_pci_machdep_pcic_intr_establish(sc, pcic_intr);
if (sc->ih == NULL) {
printf("%s: couldnt map interrupt\n", sc->dev.dv_xname);
printf("%s: couldn't map interrupt\n",
sc->dev.dv_xname);
bus_space_unmap(memt, memh, 0x10000);
bus_space_unmap(sc->iot, sc->ioh, size);
return;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_bge.c,v 1.406 2024/08/31 16:23:09 deraadt Exp $ */
/* $OpenBSD: if_bge.c,v 1.407 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2001 Wind River Systems
@ -1364,7 +1364,7 @@ bge_fill_rx_ring_std(struct bge_softc *sc)
bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std);
/*
* bge always needs more than 8 packets on the ring. if we cant do
* bge always needs more than 8 packets on the ring. if we can't do
* that now, then try again later.
*/
if (if_rxr_inuse(&sc->bge_std_ring) <= 8)
@ -1468,7 +1468,7 @@ bge_fill_rx_ring_jumbo(struct bge_softc *sc)
bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo);
/*
* bge always needs more than 8 packets on the ring. if we cant do
* bge always needs more than 8 packets on the ring. if we can't do
* that now, then try again later.
*/
if (if_rxr_inuse(&sc->bge_jumbo_ring) <= 8)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_devar.h,v 1.41 2022/03/11 18:00:45 mpi Exp $ */
/* $OpenBSD: if_devar.h,v 1.42 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: if_devar.h,v 1.13 1997/06/08 18:46:36 thorpej Exp $ */
/*-
@ -750,7 +750,7 @@ static const struct {
/*
* This driver supports a maximum of 32 tulip boards.
* This should be enough for the forseeable future.
* This should be enough for the foreseeable future.
*/
#define TULIP_MAX_DEVICES 32

View File

@ -31,7 +31,7 @@
*******************************************************************************/
/* $OpenBSD: if_em_hw.c,v 1.122 2024/06/26 01:40:49 jsg Exp $ */
/* $OpenBSD: if_em_hw.c,v 1.123 2024/09/04 07:54:52 mglocker Exp $ */
/*
* if_em_hw.c Shared functions for accessing and configuring the MAC
*/
@ -3039,7 +3039,7 @@ em_copper_link_rtl8211_setup(struct em_hw *hw)
return ret_val;
}
/* pulse streching= 42-84ms, blink rate=84mm */
/* pulse stretching= 42-84ms, blink rate=84mm */
phy_data = 0x140 | RGEPHY_LC_PULSE_42MS | RGEPHY_LC_LINK |
RGEPHY_LC_DUPLEX | RGEPHY_LC_RX;
@ -4271,7 +4271,7 @@ em_check_for_link(struct em_hw *hw)
ctrl = E1000_READ_REG(hw, CTRL);
status = E1000_READ_REG(hw, STATUS);
/*
* On adapters with a MAC newer than 82544, SW Defineable pin 1 will
* On adapters with a MAC newer than 82544, SW Definable pin 1 will
* be set when the optics detect a signal. On older adapters, it will
* be cleared when there is a signal. This applies to fiber media
* only.

View File

@ -31,7 +31,7 @@
*******************************************************************************/
/* $OpenBSD: if_em_hw.h,v 1.96 2024/09/01 03:08:56 jsg Exp $ */
/* $OpenBSD: if_em_hw.h,v 1.97 2024/09/04 07:54:52 mglocker Exp $ */
/* $FreeBSD: if_em_hw.h,v 1.15 2005/05/26 23:32:02 tackerman Exp $ */
/* if_em_hw.h
@ -1672,12 +1672,12 @@ struct em_hw {
#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
#define E1000_CTRL_EXT_LPCD 0x00000004 /* LCD Power Cycle Done */
#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Definable Pin 4 */
#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Definable Pin 5 */
#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Definable Pin 6 */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */
#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_ix.c,v 1.216 2024/08/31 16:23:09 deraadt Exp $ */
/* $OpenBSD: if_ix.c,v 1.217 2024/09/04 07:54:52 mglocker Exp $ */
/******************************************************************************
@ -2697,7 +2697,7 @@ ixgbe_get_buf(struct ix_rxring *rxr, int i)
return (ENOBUFS);
}
/* needed in any case so prealocate since this one will fail for sure */
/* needed in any case so preallocate since this one will fail for sure */
mp = MCLGETL(NULL, M_DONTWAIT, sc->rx_mbuf_sz);
if (!mp)
return (ENOBUFS);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_nxe.c,v 1.81 2024/05/24 06:02:56 jsg Exp $ */
/* $OpenBSD: if_nxe.c,v 1.82 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2007 David Gwynne <dlg@openbsd.org>
@ -2077,7 +2077,7 @@ nxe_crb_set(struct nxe_softc *sc, int window)
nxe_write(sc, NXE_WIN_CRB(sc->sc_function), r);
if (nxe_read(sc, NXE_WIN_CRB(sc->sc_function)) != r)
printf("%s: crb window hasnt moved\n", DEVNAME(sc));
printf("%s: crb window hasn't moved\n", DEVNAME(sc));
}
return (oldwindow);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_sk.c,v 1.198 2024/08/31 16:23:09 deraadt Exp $ */
/* $OpenBSD: if_sk.c,v 1.199 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 1997, 1998, 1999, 2000
@ -2271,7 +2271,7 @@ sk_init(void *xsc_if)
* transmit command due to CPU/cache related interim storage problems
* under certain conditions. The document recommends a polling
* mechanism to send a Start transmit command to initiate transfer
* of ready descriptors regulary. To cope with this issue sk(4) now
* of ready descriptors regularly. To cope with this issue sk(4) now
* enables descriptor poll timer to initiate descriptor processing
* periodically as defined by SK_DPT_TIMER_MAX. However sk(4) still
* issue SK_TXBMU_TX_START to Tx BMU to get fast execution of Tx

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_tht.c,v 1.148 2024/05/24 06:02:57 jsg Exp $ */
/* $OpenBSD: if_tht.c,v 1.149 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2007 David Gwynne <dlg@openbsd.org>
@ -260,7 +260,7 @@ int thtdebug = THT_D_TX | THT_D_RX | THT_D_INTR;
#define THT_FIFO_GAP 8 /* keep 8 bytes between ptrs */
#define THT_FIFO_PTR_MASK 0x00007ff8 /* rptr/wptr mask */
#define THT_FIFO_DESC_LEN 208 /* a descriptor cant be bigger than this */
#define THT_FIFO_DESC_LEN 208 /* a descriptor can't be bigger than this */
#define THT_IMR_DOWN(_p) (THT_REG_IMR_LINKCHG(_p))
#define THT_IMR_UP(_p) (THT_REG_IMR_LINKCHG(_p) | \
@ -1034,7 +1034,7 @@ tht_iff(struct tht_softc *sc)
}
#endif
/* fill the imperfect multicast filter with whats left */
/* fill the imperfect multicast filter with what's left */
while (enm != NULL) {
hash = 0x00;
for (i = 0; i < ETHER_ADDR_LEN; i++)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ixgbe_type.h,v 1.38 2023/08/15 08:27:30 miod Exp $ */
/* $OpenBSD: ixgbe_type.h,v 1.39 2024/09/04 07:54:52 mglocker Exp $ */
/******************************************************************************
SPDX-License-Identifier: BSD-3-Clause
@ -306,7 +306,7 @@
#define NVM_VER_INVALID 0xFFFF
#define NVM_ETK_VALID 0x8000
#define NVM_INVALID_PTR 0xFFFF
#define NVM_VER_SIZE 32 /* version sting size */
#define NVM_VER_SIZE 32 /* version string size */
struct ixgbe_nvm_version {
uint32_t etk_id;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: maestro.c,v 1.54 2024/08/18 20:28:41 deraadt Exp $ */
/* $OpenBSD: maestro.c,v 1.55 2024/09/04 07:54:52 mglocker Exp $ */
/* $FreeBSD: /c/ncvs/src/sys/dev/sound/pci/maestro.c,v 1.3 2000/11/21 12:22:11 julian Exp $ */
/*
* FreeBSD's ESS Agogo/Maestro driver
@ -991,7 +991,7 @@ maestro_open(void *hdl, int flags)
if ((flags & (FWRITE | FREAD)) == (FWRITE | FREAD))
return ENXIO; /* XXX */
/* XXX work around VM brokeness */
/* XXX work around VM brokenness */
#if 0
if ((OFLAGS(flags) & O_ACCMODE) != O_WRONLY)
return (EINVAL);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: qla_pci.c,v 1.10 2024/05/24 06:02:58 jsg Exp $ */
/* $OpenBSD: qla_pci.c,v 1.11 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2011 David Gwynne <dlg@openbsd.org>
@ -217,7 +217,7 @@ qla_pci_detach(struct device *self, int flags)
int rv;
if (psc->psc_ih == NULL) {
/* we didnt attach properly, so nothing to detach */
/* we didn't attach properly, so nothing to detach */
return (0);
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: qle.c,v 1.65 2024/05/24 06:02:58 jsg Exp $ */
/* $OpenBSD: qle.c,v 1.66 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2013, 2014 Jonathan Matthew <jmatthew@openbsd.org>
@ -691,7 +691,7 @@ qle_detach(struct device *self, int flags)
struct qle_softc *sc = (struct qle_softc *)self;
if (sc->sc_ih == NULL) {
/* we didnt attach properly, so nothing to detach */
/* we didn't attach properly, so nothing to detach */
return (0);
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: qlw_pci.c,v 1.13 2024/05/24 06:02:58 jsg Exp $ */
/* $OpenBSD: qlw_pci.c,v 1.14 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2011 David Gwynne <dlg@openbsd.org>
@ -302,7 +302,7 @@ qlw_pci_detach(struct device *self, int flags)
int rv;
if (psc->psc_ih == NULL) {
/* we didnt attach properly, so nothing to detach */
/* we didn't attach properly, so nothing to detach */
return (0);
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: vmwpvs.c,v 1.28 2024/05/24 06:02:58 jsg Exp $ */
/* $OpenBSD: vmwpvs.c,v 1.29 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2013 David Gwynne <dlg@openbsd.org>
@ -499,7 +499,7 @@ vmwpvs_attach(struct device *parent, struct device *self, void *aux)
sc->sc_ccbs = mallocarray(r, sizeof(struct vmwpvs_ccb),
M_DEVBUF, M_WAITOK);
/* cant fail */
/* can't fail */
sgls = VMWPVS_DMA_KVA(sc->sc_sgls);
sense = VMWPVS_DMA_KVA(sc->sc_sense);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: xenreg.h,v 1.11 2022/01/09 05:42:58 jsg Exp $ */
/* $OpenBSD: xenreg.h,v 1.12 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Permission is hereby granted, free of charge, to any person obtaining a copy
@ -534,7 +534,7 @@ struct evtchn_unmask {
};
/*
* Superceded by new event_channel_op() hypercall since 0x00030202.
* Superseded by new event_channel_op() hypercall since 0x00030202.
*/
struct evtchn_op {
uint32_t cmd; /* EVTCHNOP_* */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: uperf_sbusreg.h,v 1.3 2003/06/02 18:32:41 jason Exp $ */
/* $OpenBSD: uperf_sbusreg.h,v 1.4 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2002 Jason L. Wright (jason@thought.net)
@ -174,7 +174,7 @@
#define USC_MEM0_MRE 0x01000000 /* missed refresh error */
#define USC_MEM0_RPMC 0x00800000 /* RAS Phi 0 cookie for refresh */
#define USC_MEM0_RWMC 0x00400000 /* RAS Phi 0 cookie for writers */
#define USC_MEM0_SW0 0x001f0000 /* strecth count for first write */
#define USC_MEM0_SW0 0x001f0000 /* stretch count for first write */
#define USC_MEM0_SP 0x00000f00 /* simm present mask */
#define USC_MEM0_REFI 0x000000ff /* refresh interval */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_axe.c,v 1.143 2024/05/23 03:21:08 jsg Exp $ */
/* $OpenBSD: if_axe.c,v 1.144 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2005, 2006, 2007 Jonathan Gray <jsg@openbsd.org>
@ -305,7 +305,7 @@ axe_miibus_readreg(struct device *dev, int phy, int reg)
/*
* BMSR of AX88772 indicates that it supports extended
* capability but the extended status register is
* revered for embedded ethernet PHY. So clear the
* reserved for embedded ethernet PHY. So clear the
* extended capability bit of BMSR.
*/
ival &= ~BMSR_EXTCAP;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: usb.c,v 1.132 2024/08/18 02:59:51 deraadt Exp $ */
/* $OpenBSD: usb.c,v 1.133 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: usb.c,v 1.77 2003/01/01 00:10:26 thorpej Exp $ */
/*
@ -260,7 +260,7 @@ usb_detach_roothub(struct usb_softc *sc)
sc->sc_bus->flags |= USB_BUS_DISCONNECTING;
/*
* Reset the dying flag in case it has been set by the interrupt
* handler when unplugging an HC card otherwise the task wont be
* handler when unplugging an HC card otherwise the task won't be
* scheduled. This is safe since a dead HC should not trigger
* new interrupt.
*/

View File

@ -1,4 +1,4 @@
/* $OpenBSD: xhcireg.h,v 1.19 2024/04/23 04:12:53 jsg Exp $ */
/* $OpenBSD: xhcireg.h,v 1.20 2024/09/04 07:54:52 mglocker Exp $ */
/*-
* Copyright (c) 2014 Martin Pieuchot. All rights reserved.
@ -65,12 +65,12 @@
#define XHCI_HCIVERSION_0_9 0x0090 /* xHCI version 0.9 */
#define XHCI_HCIVERSION_1_0 0x0100 /* xHCI version 1.0 */
#define XHCI_HCSPARAMS1 0x04 /* RO structual parameters 1 */
#define XHCI_HCSPARAMS1 0x04 /* RO structural parameters 1 */
#define XHCI_HCS1_DEVSLOT_MAX(x)((x) & 0xff)
#define XHCI_HCS1_IRQ_MAX(x) (((x) >> 8) & 0x3ff)
#define XHCI_HCS1_N_PORTS(x) (((x) >> 24) & 0xff)
#define XHCI_HCSPARAMS2 0x08 /* RO structual parameters 2 */
#define XHCI_HCSPARAMS2 0x08 /* RO structural parameters 2 */
#define XHCI_HCS2_IST(x) ((x) & 0x7)
#define XHCI_HCS2_IST_MICRO(x) (!((x) & 0x8))
#define XHCI_HCS2_ERST_MAX(x) (((x) >> 4) & 0xf)
@ -78,7 +78,7 @@
#define XHCI_HCS2_SPR(x) (((x) >> 26) & 0x1)
#define XHCI_HCS2_SPB_MAX(x) ((((x) >> 16) & 0x3e0) | (((x) >> 27) & 0x1f))
#define XHCI_HCSPARAMS3 0x0c /* RO structual parameters 3 */
#define XHCI_HCSPARAMS3 0x0c /* RO structural parameters 3 */
#define XHCI_HCS3_U1_DEL(x) ((x) & 0xff)
#define XHCI_HCS3_U2_DEL(x) (((x) >> 16) & 0xffff)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: x86emu.c,v 1.12 2022/01/09 05:43:02 jsg Exp $ */
/* $OpenBSD: x86emu.c,v 1.13 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: x86emu.c,v 1.7 2009/02/03 19:26:29 joerg Exp $ */
/*
@ -398,7 +398,7 @@ fetch_long_imm(struct x86emu *emu)
* gs segment override
* ss segment override
*
* ds/ss select (in absense of override)
* ds/ss select (in absence of override)
*
* Each of the above 7 items are handled with a bit in the mode field.
*/

View File

@ -1,4 +1,4 @@
/* $OpenBSD: divsi3.S,v 1.6 2022/12/08 01:25:46 guenther Exp $ */
/* $OpenBSD: divsi3.S,v 1.7 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: divsi3.S,v 1.2 2001/11/13 20:06:40 chris Exp $ */
/*
@ -371,7 +371,7 @@ L_divide_b0:
cmp ip, #0
rsbmi r1, r1, #0
movs ip, ip, lsl #1
bicmi r0, r0, #0x80000000 /* Fix incase we divided 0x80000000 */
bicmi r0, r0, #0x80000000 /* Fix in case we divided 0x80000000 */
rsbmi r0, r0, #0
mov pc, lr

View File

@ -1,4 +1,4 @@
/* $OpenBSD: memmove.S,v 1.6 2022/01/29 05:47:36 visa Exp $ */
/* $OpenBSD: memmove.S,v 1.7 2024/09/04 07:54:52 mglocker Exp $ */
/*-
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
@ -70,7 +70,7 @@ ALEAF(bcopy)
PTR_ADDU t1, a1, a2 # t1 = end of to region
1:
lb v1, -1(t0) # copy bytes backwards,
PTR_SUBU t0, t0, 1 # doesnt happen often so do slow way
PTR_SUBU t0, t0, 1 # doesn't happen often so do slow way
PTR_SUBU t1, t1, 1
bne t0, a0, 1b
sb v1, 0(t1)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: msdosfs_vnops.c,v 1.141 2024/05/13 11:17:40 semarie Exp $ */
/* $OpenBSD: msdosfs_vnops.c,v 1.142 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: msdosfs_vnops.c,v 1.63 1997/10/17 11:24:19 ws Exp $ */
/*-
@ -717,7 +717,7 @@ msdosfs_write(void *v)
* it. Otherwise, if on a cluster boundary write it
* asynchronously so we can move on to the next block
* without delay. Otherwise do a delayed write because we
* may want to write somemore into the block later.
* may want to write some more into the block later.
*/
#if 0
if (ioflag & IO_NOCACHE)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: if_aggr.c,v 1.45 2024/03/18 06:14:50 dlg Exp $ */
/* $OpenBSD: if_aggr.c,v 1.46 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2019 The University of Queensland
@ -1885,7 +1885,7 @@ aggr_set_selected(struct aggr_port *p, enum aggr_port_selected s,
aggr_port_selected_names[s]);
/*
* setting p_selected doesnt need the mtx except to
* setting p_selected doesn't need the mtx except to
* coordinate with a kstat read.
*/

View File

@ -1,4 +1,4 @@
/* $OpenBSD: pf.c,v 1.1204 2024/08/06 16:56:09 bluhm Exp $ */
/* $OpenBSD: pf.c,v 1.1205 2024/09/04 07:54:52 mglocker Exp $ */
/*
* Copyright (c) 2001 Daniel Hartmeier
@ -5008,7 +5008,7 @@ pf_tcp_track_full(struct pf_pdesc *pd, struct pf_state **stp, u_short *reason,
* (Selective ACK). We could optionally validate the SACK values
* against the current ACK window, either forwards or backwards, but
* I'm not confident that SACK has been implemented properly
* everywhere. It wouldn't surprise me if several stacks accidently
* everywhere. It wouldn't surprise me if several stacks accidentally
* SACK too far backwards of previously ACKed data. There really aren't
* any security implications of bad SACKing unless the target stack
* doesn't validate the option length correctly. Someone trying to

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ieee80211_node.c,v 1.198 2023/10/22 12:01:36 stsp Exp $ */
/* $OpenBSD: ieee80211_node.c,v 1.199 2024/09/04 07:54:52 mglocker Exp $ */
/* $NetBSD: ieee80211_node.c,v 1.14 2004/05/09 09:18:47 dyoung Exp $ */
/*-
@ -2444,7 +2444,7 @@ ieee80211_40mhz_valid_secondary_below(uint8_t primary_chan)
* Only accept 40 MHz channel configurations that conform to
* regulatory operating classes as defined by the 802.11ac spec.
* Passing other configurations down to firmware can result in
* regulatory assertions being trigged, such as fatal firmware
* regulatory assertions being triggered, such as fatal firmware
* error 14FD in iwm(4).
*
* See 802.11ac 2013, page 380, Tables E-1 to E-5.
@ -2521,7 +2521,7 @@ ieee80211_setup_vhtcaps(struct ieee80211_node *ni, const uint8_t *data,
* Only accept 80 MHz channel configurations that conform to
* regulatory operating classes as defined by the 802.11ac spec.
* Passing other configurations down to firmware can result in
* regulatory assertions being trigged, such as fatal firmware
* regulatory assertions being triggered, such as fatal firmware
* error 14FD in iwm(4).
*
* See 802.11ac 2013, page 380, Tables E-1 to E-5.

View File

@ -1,4 +1,4 @@
/* $OpenBSD: nd6.c,v 1.282 2024/07/14 18:53:39 bluhm Exp $ */
/* $OpenBSD: nd6.c,v 1.283 2024/09/04 07:54:52 mglocker Exp $ */
/* $KAME: nd6.c,v 1.280 2002/06/08 19:52:07 itojun Exp $ */
/*
@ -99,7 +99,7 @@ struct mutex nd6_mtx = MUTEX_INITIALIZER(IPL_SOFTNET);
TAILQ_HEAD(llinfo_nd6_head, llinfo_nd6) nd6_list =
TAILQ_HEAD_INITIALIZER(nd6_list); /* [mN] list of llinfo_nd6 structures */
struct pool nd6_pool; /* [I] pool for llinfo_nd6 structures */
int nd6_inuse; /* [m] limit neigbor discovery routes */
int nd6_inuse; /* [m] limit neighbor discovery routes */
unsigned int ln_hold_total; /* [a] packets currently in the nd6 queue */
void nd6_timer(void *);

View File

@ -1,4 +1,4 @@
/* $OpenBSD: nfs_socket.c,v 1.151 2024/07/12 17:20:18 mvs Exp $ */
/* $OpenBSD: nfs_socket.c,v 1.152 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: nfs_socket.c,v 1.27 1996/04/15 20:20:00 thorpej Exp $ */
/*
@ -996,10 +996,10 @@ tryagain:
/*
* Since we only support RPCAUTH_UNIX atm we step over the
* reply verifer type, and in the (error) case that there really
* reply verifier type, and in the (error) case that there really
* is any data in it, we advance over it.
*/
tl++; /* Step over verifer type */
tl++; /* Step over verifier type */
i = fxdr_unsigned(int32_t, *tl);
if (i > 0) {
/* Should not happen */

View File

@ -1,4 +1,4 @@
/* $OpenBSD: nfs_subs.c,v 1.149 2024/05/01 13:15:59 jsg Exp $ */
/* $OpenBSD: nfs_subs.c,v 1.150 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: nfs_subs.c,v 1.27.4.3 1996/07/08 20:34:24 jtc Exp $ */
/*
@ -565,7 +565,7 @@ nfsm_rpchead(struct nfsreq *req, struct ucred *cr, int auth_type)
/*
* We need to start out by finding how big the authorization cred
* and verifer are for the auth_type, to be able to correctly
* and verifier are for the auth_type, to be able to correctly
* align the mbuf header/chain.
*/
switch (auth_type) {
@ -573,7 +573,7 @@ nfsm_rpchead(struct nfsreq *req, struct ucred *cr, int auth_type)
/*
* In the RPCAUTH_UNIX case, the size is the static
* part as shown in RFC1831 + the number of groups,
* RPCAUTH_UNIX has a zero verifer.
* RPCAUTH_UNIX has a zero verifier.
*/
if (cr->cr_ngroups > req->r_nmp->nm_numgrps)
ngroups = req->r_nmp->nm_numgrps;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ntfs_vfsops.c,v 1.65 2022/01/11 03:13:59 jsg Exp $ */
/* $OpenBSD: ntfs_vfsops.c,v 1.66 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: ntfs_vfsops.c,v 1.7 2003/04/24 07:50:19 christos Exp $ */
/*-
@ -340,7 +340,7 @@ ntfs_mountfs(struct vnode *devvp, struct mount *mp, struct ntfs_args *argsp,
/*
* We read in some system nodes to do not allow
* reclaim them and to have everytime access to them.
* reclaim them and to have every time access to them.
*/
{
int pi[3] = { NTFS_MFTINO, NTFS_ROOTINO, NTFS_BITMAPINO };

View File

@ -1,4 +1,4 @@
/* $OpenBSD: safte.c,v 1.67 2021/10/24 16:57:30 mpi Exp $ */
/* $OpenBSD: safte.c,v 1.68 2024/09/04 07:54:53 mglocker Exp $ */
/*
* Copyright (c) 2005 David Gwynne <dlg@openbsd.org>
@ -352,7 +352,7 @@ safte_read_config(struct safte_softc *sc)
/*
* Stash the temp info so we can get out of range status. Limit the
* number so the out of temp checks can't go into memory it doesnt own.
* number so the out of temp checks can't go into memory it doesn't own.
*/
sc->sc_ntemps = (config->ntemps > 15) ? 15 : config->ntemps;
sc->sc_temps = s;

View File

@ -1,4 +1,4 @@
/* $OpenBSD: scsi_base.c,v 1.283 2023/08/02 19:58:52 kettenis Exp $ */
/* $OpenBSD: scsi_base.c,v 1.284 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: scsi_base.c,v 1.43 1997/04/02 02:29:36 mycroft Exp $ */
/*
@ -437,7 +437,7 @@ scsi_iopool_run(struct scsi_iopool *iopl)
}
/*
* move an io from a runq to a proc thats waiting for an io.
* move an io from a runq to a proc that's waiting for an io.
*/
void
@ -1512,7 +1512,7 @@ scsi_xs_sync(struct scsi_xfer *xs)
#endif /* DIAGNOSTIC */
/*
* If we cant sleep while waiting for completion, get the adapter to
* If we can't sleep while waiting for completion, get the adapter to
* complete it for us.
*/
if (ISSET(xs->flags, SCSI_NOSLEEP))

View File

@ -1,4 +1,4 @@
/* $OpenBSD: scsiconf.c,v 1.253 2022/04/06 17:39:13 krw Exp $ */
/* $OpenBSD: scsiconf.c,v 1.254 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: scsiconf.c,v 1.57 1996/05/02 01:09:01 neil Exp $ */
/*
@ -524,7 +524,7 @@ scsi_probe_link(struct scsibus_softc *sb, int target, int lun, int dumbscan)
}
/*
* If we havent been given an io pool by now then fall back to
* If we haven't been given an io pool by now then fall back to
* using link->openings.
*/
if (link->pool == NULL) {

View File

@ -1,4 +1,4 @@
/* $OpenBSD: sd.c,v 1.336 2024/05/04 16:40:38 kn Exp $ */
/* $OpenBSD: sd.c,v 1.337 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: sd.c,v 1.111 1997/04/02 02:29:41 mycroft Exp $ */
/*-
@ -1648,7 +1648,7 @@ sd_get_parms(struct sd_softc *sc, int flags)
return -1;
if (ISSET(sc->flags, SDF_THIN) && sd_thin_params(sc, flags) != 0) {
/* we dont know the unmap limits, so we cant use thin shizz */
/* we don't know the unmap limits, so we can't use this shizz */
CLR(sc->flags, SDF_THIN);
}

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ses.h,v 1.10 2006/05/11 00:45:59 krw Exp $ */
/* $OpenBSD: ses.h,v 1.11 2024/09/04 07:54:53 mglocker Exp $ */
/*
* Copyright (c) 2005 Marco Peereboom
* All rights reserved.
@ -92,7 +92,7 @@ struct ses_enc_hdr {
/* enclosure descriptor strings */
struct ses_enc_desc {
u_int8_t logical_id[8]; /* this isnt a string */
u_int8_t logical_id[8]; /* this isn't a string */
u_int8_t vendor_id[8];
u_int8_t prod_id[16];
u_int8_t prod_rev[4];

View File

@ -1,4 +1,4 @@
/* $OpenBSD: st.c,v 1.190 2023/04/27 18:21:44 robert Exp $ */
/* $OpenBSD: st.c,v 1.191 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: st.c,v 1.71 1997/02/21 23:03:49 thorpej Exp $ */
/*
@ -1223,7 +1223,7 @@ stioctl(dev_t dev, u_long cmd, caddr_t arg, int flag, struct proc *p)
try_new_value:
/*
* Check that the mode being asked for is aggreeable to the
* Check that the mode being asked for is agreeable to the
* drive. If not, put it back the way it was.
*/
if ((error = st_mode_select(st, 0)) != 0) {/* put it back as it was */

View File

@ -211,7 +211,7 @@ VOID
//
// EFI platform varibles
// EFI platform variables
//
#define EFI_GLOBAL_VARIABLE \
@ -672,7 +672,7 @@ typedef struct _EFI_TABLE_HEARDER {
//
// EFI Runtime Serivces Table
// EFI Runtime Services Table
//
#define EFI_RUNTIME_SERVICES_SIGNATURE 0x56524553544e5552

View File

@ -65,7 +65,7 @@ EFI_STATUS
Arguments:
This - Protocol instance pointer.
Mode - Are we in text of grahics mode.
Mode - Are we in text of graphics mode.
GopUgaExists - TRUE if Console Spliter has found a GOP or UGA device
StdInLocked - TRUE if StdIn device is keyboard locked

View File

@ -135,7 +135,7 @@ typedef enum {
MaxAllocateType
} EFI_ALLOCATE_TYPE;
//Preseve the attr on any range supplied.
//Preserve the attr on any range supplied.
//ConventialMemory must have WB,SR,SW when supplied.
//When allocating from ConventialMemory always make it WB,SR,SW
//When returning to ConventialMemory always make it WB,SR,SW

View File

@ -29,7 +29,7 @@ Revision History
//
// EFI Partition header (normaly starts in LBA 1)
// EFI Partition header (normally starts in LBA 1)
//
#define EFI_PARTITION_SIGNATURE 0x5053595320494249
@ -85,7 +85,7 @@ typedef struct _EFI_FILE_HEADER {
//
// Logical Block Address List - the fundemental block
// Logical Block Address List - the fundamental block
// description structure
//

View File

@ -309,7 +309,7 @@ typedef struct {
// Whenever code needs to know the size of the EFI_FILE_INFO data structure, it needs to
// be the size of the data structure without the FileName field. The following macro
// computes this size correctly no matter how big the FileName array is declared.
// This is required to make the EFI_FILE_INFO data structure ANSI compilant.
// This is required to make the EFI_FILE_INFO data structure ANSI compliant.
//
#define SIZE_OF_EFI_FILE_INFO EFI_FIELD_OFFSET(EFI_FILE_INFO,FileName)
@ -331,7 +331,7 @@ typedef struct {
// Whenever code needs to know the size of the EFI_FILE_SYSTEM_INFO data structure, it needs
// to be the size of the data structure without the VolumeLable field. The following macro
// computes this size correctly no matter how big the VolumeLable array is declared.
// This is required to make the EFI_FILE_SYSTEM_INFO data structure ANSI compilant.
// This is required to make the EFI_FILE_SYSTEM_INFO data structure ANSI compliant.
//
#define SIZE_OF_EFI_FILE_SYSTEM_INFO EFI_FIELD_OFFSET(EFI_FILE_SYSTEM_INFO,VolumeLabel)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: ext2fs_vfsops.c,v 1.120 2024/06/07 09:26:37 jsg Exp $ */
/* $OpenBSD: ext2fs_vfsops.c,v 1.121 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: ext2fs_vfsops.c,v 1.1 1997/06/11 09:34:07 bouyer Exp $ */
/*
@ -1066,7 +1066,7 @@ ext2fs_cgupdate(struct ufsmount *mp, int waitfor)
return (allerror);
}
/* This is called before the superblock is copied. Watch out for endianity! */
/* This is called before the superblock is copied. Watch out for endianness! */
static int
e2fs_sbcheck(struct ext2fs *fs, int ronly)
{

View File

@ -1,4 +1,4 @@
/* $OpenBSD: uvm_addr.c,v 1.36 2024/07/04 04:52:10 jsg Exp $ */
/* $OpenBSD: uvm_addr.c,v 1.37 2024/09/04 07:54:53 mglocker Exp $ */
/*
* Copyright (c) 2011 Ariane van der Steldt <ariane@stack.nl>
@ -1076,7 +1076,7 @@ uaddr_pivot_newpivot(struct vm_map *map, struct uaddr_pivot_state *uaddr,
*
* Characteristics of the allocator:
* - best case, an allocation is O(log N)
* (it would be O(1), if it werent for the need to check if the memory is
* (it would be O(1), if it weren't for the need to check if the memory is
* free; although that can be avoided...)
* - worst case, an allocation is O(log N)
* (the uaddr_pivot_newpivot() function has that complexity)

View File

@ -1,4 +1,4 @@
/* $OpenBSD: uvm_swap.c,v 1.170 2024/04/16 10:06:37 claudio Exp $ */
/* $OpenBSD: uvm_swap.c,v 1.171 2024/09/04 07:54:53 mglocker Exp $ */
/* $NetBSD: uvm_swap.c,v 1.40 2000/11/17 11:39:39 mrg Exp $ */
/*
@ -1520,7 +1520,7 @@ ReTry: /* XXXMRG */
* smaller than the size of a cluster.
*
* As long as some swap slots are being used by pages currently in memory,
* it is possible to reuse them. Even if the swap space has been completly
* it is possible to reuse them. Even if the swap space has been completely
* filled we do not consider it full.
*/
int